Silhouette Cameo cut settings

Category : Silhouette Cameo



Silhouette Cameo cut settings

T-SHIRT TRANSFER

 

MATERIAL SELECTION:

  • Material selection: FLEX > This will cut the shape but leave the plastic on top.
  • When using this material, draw a square round the illustration as it will help with cutting out the folie sheet.
  • IF Material selection: FOLIE TRANSFER SHEET, knife settings MUST be set to 5. (This is because it does not have automatic blade knife settings). This setting will cut the piece through.
  • Mat side up ( on the cut mat )
  • When complete cut it out the material and place it on the t-shirt.
  • If FLEX > peel the plastic layer.
  • If FOLIE > pieces can be placed directly onto thsirt.

 

HEAT PRESS

  • 155 degrees
  • 30 seconds > more or less

 

HEAT PRESS SETTINGS

  • Press mode
  • Set temparature > use arrows left or right to increase/decrease
  • Press mode
  • set time > this is the time the heat press will heat 
  • Press mode
  • settings are ready. Heat press will start to heat and will make a sound when ready